| Fault Code Description |
|---|
| Fault Code Conditions |
|---|
| Fault Time Condition |
|---|
|
DME: Intelligent battery sensor, communication |
| Service Plan |
|---|
|
Battery Sensor BSD (Bit Serial Data Interface) Communication Circuit |
| Fault Impact |
|---|
|
Terminal 87 >10.0 V Terminal 15 ON IBS communications monitor |
| Warnings |
|---|
| Service Notes |
|---|
|
1. Determine whether battery sensor is installed. If not, use SGBD to delete all adaptation data and then switch ignition off/on. 2. Check continuity in wire connecting DME to battery sensor (BSD_BUS) 3. Ensure correct fit of battery sensor on battery ground terminal and check seating of all plugs 4. Replace battery sensor. |