| Fault Code Description |
|---|
| Fault Code Conditions |
|---|
| Fault Time Condition |
|---|
|
DME: Crankshaft - inlet camshaft, synchronization |
| Service Plan |
|---|
|
Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor A) |
| Fault Impact |
|---|
|
none Terminal 15 on Engine turning over |
| Warnings |
|---|
| Service Notes |
|---|
|
1. Check signal wire for short to positive, ground, open wire. 2. Replace camshaft sensor. 3. Check positions (valve timing setting) of camshaft reluctors 4. Check timing chain and chain tensioner assembly. 5. Check VANOS solenoids for dirt and contamination |