| Fault Code Description |
|---|
| Fault Code Conditions |
|---|
| Fault Time Condition |
|---|
|
Valvetronic, actuator motor: power supply |
| Service Plan |
|---|
|
VVL-Control Motor Supply Voltage Circuit Low (Bank 1) |
| Fault Impact |
|---|
|
Electrical system voltage terminal 87 >10.0 V Terminal 15 ON VVT servo motor power supply monitor |
| Warnings |
|---|
| Service Notes |
|---|
|
1. Check VVT power supply voltage with multimeter. Supply voltage must lie between 5.75V and 17V. 2. If result is outside specified range: Inspect the power-supply wire to the VVT pins and check the plug. 3. If contact is stretched or corroded: Replace plug 4. If wiring harness is defective: Replace wiring harness. |