Fault Code Description |
---|
The fault is detected when following fault causes occur: Internal diagnosis in the RDC control unit reports a sensor faultthe front left wheel electronics could not be received continuously during a driving time of 9 minutes (European version) or 18 minutes (US version). The individual fault causes are stored in the corresponding types of fault. Fault entry condition for corresponding type of fault: Type of fault: wheel electronics faulty: The RDC control unit detected the wheels belonging to the vehicle and set the air pressure sensor diagnosis bitType of fault: wheel electronics, no reception: Assignment timeout (maximum 9 (European version) or 18 minutes US version)) elapsed and wheel electronics is not transmitting |
Fault Code Conditions | |
---|---|
General Conditions |
Terminal 30 between 9 V and 17 V |
Terminal Condition |
|
Driving Conditions |
Driving condition for corresponding type of fault: Type of fault: wheel electronics faulty: NoneType of fault: wheel electronics, no reception: Vehicle moving |
Fault Time Condition |
---|
Fault debounce for corresponding type of fault: Type of fault: wheel electronics faulty: 120 s / 270 sType of fault: wheel electronics, no reception: 120 s / 600 s |
Service Plan |
---|
Possible fault cause: - Front left wheel electronics Perform troubleshooting according to testing procedure (ABL). |
Fault Impact |
---|
Warnings | |
---|---|
Warning Lights |
Warning light active Check control message (149): Tyre Pressure Monitor failed! |
Control Center Messages |
Service Notes |
---|